CHAMPION MANUFACTURING INDUSTRIES, INC.

537-RDCR/INCR/NC TAPERS
SIZE GA ITEM
4 X 3.......26.......3296
5 X 3.......26.......3297
5 X 4.......26.......3298
6 X 3.......26.......3299
6 X 4.......26.......3300
6 X 5.......26.......3301
7 X 4.......26.......3303
7 X 5.......26.......3304
7 X 6.......26.......3305
8 X 4.......26.......3306
8 X 5.......26.......3307
8 X 6.......26.......3308

537-RDCR/INCR/NC TAPERS
SIZE GA ITEM
8 X 7.....26.......3309
9 X 6.....26.......3311
9 X 7.....26.......3312
9 X 8.....26.......3313
10 X 6.....26.......3315
10 X 7.....26.......3316
10 X 8.....26.......3317
10 X 9.....26.......3318
12 X 8.....26.......3321
12 X 9.....26.......3322
12 X 10.....26.......3323
14 X 6.....26.......3331

537-RDCR/INCR/NC TAPERS
SIZE GA ITEM
14 X 8.....26.......3324
14 X 9.....26.......3325
14 X 10.....26.......3326
14 X 12.....26.......3327
16 X 10.....26.......3328
16 X 12.....26.......3329
16 X 14.....26.......3330
18 X 12.....26.......3332
18 X 14.....26.......3333
18 X 16.....26.......3334
20 X 16.....26.......3336
20 X 18.....26.......3337

UNIVERSAL CAP - 26 GA

522 - N/CR

SIZE ITEM QTY
4"............3165.........12
5"............3166.........12
6"............3167.........12
7"............3168.........12
8"............3169.........12

523 - W/CR

SIZE ITEM QTY
4"............3177.........12
5"............3178.........12
6"............3179.........12
7"............3180.........12
8"............3157.........12

632 - N/CR

SIZE ITEM QTY
4"............4367.........12
5"............4368.........12
6"............4369.........12
7"............4370.........12
8"............4371.........12

633 - W/CR

SIZE ITEM QTY
4"............4379.........12
5"............4380.........12
6"............4357.........12
7"............4382.........12
8"............4383.........12

CLEANOUT CAP - 24 GA TOP - 26 GA BODY

522 - N/CR

SIZE ITEM QTY
3"............3164.........12
9"............3170.........12
10"...........3171.........12
12"...........3172.........12
14"...........3173.........12
16"...........3174.........12
18"...........3175.........12

523 - W/CR

SIZE ITEM QTY
9"............3182.........12
10"...........3183.........12
12"...........3184.........12
14"...........3185.........12

REDUCER CAP - 28 GA

632 - N/CR

SIZE ITEM QTY
3"...........4366.........12
9"...........4372.........12
10"..........4373.........12
12"..........4374.........12
14"..........4375.........12
16"..........4376.........12

633 - N/CR

SIZE ITEM QTY
3"...........4378.........12
9"...........4384.........12
10"..........4385.........12
12"..........4386.........12
14"..........4387.........12
16"..........4388.........12

Champion tapers are short so they can be used as a tapered reducer/increaser or as a cap type reducer/increaser. The 26 gauge minimum thickness allows them to be used to vent fossil fuel appliances as well as in conditioned air distribution systems. Tapers are normally stocked non-crimped. Either end can be crimped by the installer or special ordered from Champion. Champion makes a full line of caps. The new "universal" cap can be used to make cap-type reducers as well as clean out applications. The unique lock between the top and sides is very durable and air tight. All caps 4"-8" are made with this lock. All other sizes can be purchased with either the clean out cap configuration or the reducer cap configuration. Both of these traditional locks have been used in the HVAC industry for decades. Caps are used to make reducers, plug round cut outs, cap off round pipe runs, and "tee" clean outs.

6021 N. Galena Road
Peoria, Illinois 61614
Phone: (309) 685-1031

CUSTOMER SERVICE: (800) 452-7473
CUSTOMER SERVICE FAX: (309) 685-1159
CUSTOMER SERVICE HOURS: 7:30 AM - 4:30 PM CST